Quality & Testing

How to Ship Concrete Bath Sets by Sea Without Breakage

A buyer's guide to shipping concrete bathroom sets by sea: full-surround EVA packaging, the 1.2-metre drop test, and the three packaging terms to put in your order before you pay.

Shipping Concrete Bath Sets by Sea
For a long sea journey, concrete bathroom pieces need two things: full-surround, high-density EVA packaging moulded to each piece, and a 1.2-metre drop test you can verify. Laki Living states that its finished packing meets a 1.2-metre drop test and uses custom-moulded high-density EVA inserts — treat that as the factory's own brand claim until you have seen the test report and photographs of the packed product. This guide shows you how to check both, and how to put the packaging, the test and the breakage procedure into your order.
This guide is for you if you buy concrete bathroom sets for a hotel project or an online store and your goods travel by sea or long-distance courier, where one broken soap dish can hold up an opening. It is not for you if your goods only travel a short local distance and you need no custom packaging. Picture the container arriving at your port after weeks at sea: you open the first carton, lift out a lotion bottle, and the neck is cracked clean through — two weeks before your opening date.

The Breakage Is Not Fragile Concrete. It Is Packaging Built for the Wrong Journey

The same set arrives intact after a short trip by van, and broken after travelling by sea. The pieces did not change — the journey did. A van trip is one loading and one unloading; a sea shipment is a chain of handlings: a truck to the port, a container yard, a crane lift, weeks of vibration at sea, another crane lift, customs, and a final truck to your warehouse. Every link is a chance for a carton to be dropped, tilted or stacked under a heavier load, and packaging that survives one gentle trip is no proof it survives eight handlings.
Concrete makes the mismatch worse, because a concrete piece is heavy and rigid. A lighter material can flex a little when it takes a knock; a concrete bottle, tray or soap dish cannot, so the force goes straight to the thinnest point: the neck of the bottle, the corner of the tray, the rim of the dish. The damage on arrival is rarely a piece smashed in half — it is a cracked neck, a chipped corner, a hairline split you only notice when you pick the piece up. The piece is not too fragile for your project — the packaging was designed for a shorter, gentler journey.

Where Breakage Happens: Three Links and One Missing Proof

Breakage on a sea shipment usually comes from one of three links, and you can check each one before you order. The first link is the protection around a single piece: ask whether the EVA insert fully surrounds the piece and whether it is moulded to the shape of your exact product. Generic foam and loose fill leave empty space, and empty space lets a heavy concrete piece move — once it moves, the corner of a tray or the neck of a bottle meets the inside of the carton with every bump. A photograph of your piece seated in its own EVA insert tells you more than any promise.
The second link is the outer carton and the way cartons are stacked. A carton that holds one layer of concrete pieces can still fail under three cartons of heavy bathroom sets stacked on top of it. Ask in writing how the cartons are stacked, what the outer carton is made to carry, and whether there is a stacking limit for your order. You are ordering 1,000 pieces at minimum, so this is not a question about one box — it is about how a thousand heavy pieces travel together, and the answer belongs in writing next to your order.
The third link is the test, and this is where most buyers stop asking. A 1.2-metre drop test sounds reassuring, but the number alone tells you very little: was it run on a single bare piece, or on the fully packed carton you will actually receive? Which faces and corners were dropped, and how many times? A report answers those questions. Laki Living states that its finished packing meets a 1.2-metre drop test and that breakage on long sea and courier journeys is close to zero. Both are the factory's own brand claims, not verified third-party results, and no test report or packing photograph has been provided yet. Ask for the report and the packing photographs, and let the evidence — not the claim — decide.

Before You Order: Put Three Packaging Terms in Writing

The fix is straightforward: write three packaging terms into your order before you pay, so both sides work from the same document. The first term is the packaging structure. State that each piece ships in full-surround, high-density EVA packaging custom-moulded to that piece, and ask for a structure diagram or a photograph of the packed product — the diagram stops a substitution later, because if the insert that arrives is a flat foam sheet instead of a moulded cradle, you can hold the diagram next to it and show the difference. Your set is custom in four dimensions — shape, colour, size and material — with your logo laser-engraved, so the packaging should be custom to the piece as the piece is to your brand.
The second term is the test basis. State that the packed product is tested to a 1.2-metre drop test, and ask for the report as a file, not as a sentence. The report should show what was tested — the single piece or the packed carton — and how the test was run. If the factory cannot provide a report, write that into your order anyway: the claim stands as the factory's own statement, and the packed sample will be checked on arrival. A physical sample can be ready in as fast as 3–5 days from your drawing or 3D file — ask for it to travel in the same EVA packaging your bulk order will use, so you can judge the packing with the piece in your hands.
The third term is the breakage procedure. Write down how broken pieces are recorded, photographed and reported, and how replacements are handled — before any carton is opened. Do not agree any compensation figure you have not seen in writing, and do not leave the procedure to be negotiated after the damage has happened. Laki Living is a manufacturer in Huizhou, China, founded in 2018, working from a 9,800-square-metre workshop and listed as a SGS Verified Supplier at factory level — which describes the factory, not a certificate for any single piece. That background is worth knowing, but it is no substitute for the three terms above.

Three Situations When You Should Not Place a Large Order Yet

There are three situations in which the right move is to hold the large order. The first is when the packaging photographs and the test report cannot be produced. If the factory cannot show you the EVA insert or the drop test report, place a small trial order first and check the packaging on arrival. The second is when all you have is a spoken promise. If the only assurance is that the packaging "never breaks", with nothing written into the order, you have no term to point to when a carton arrives damaged, so wait until all three terms are in writing. The third is when the breakage procedure itself has not been agreed. If you do not know how to record a broken piece, who to report it to, or how a replacement is handled, you do not yet know what happens on the worst day of the shipment.
Whatever the size of your order, build one habit into your receiving routine. When the goods arrive, check three things in order: the outer carton, the EVA insert and the piece inside. If anything is broken, photograph it before you move it or unpack the rest of the shipment — that photograph is the record your breakage term runs on. Report the damage with those photographs attached, and keep a copy of everything you send.

Your Next Step: Attach This Packaging Checklist Before You Send the Order

Send your order when the three terms are written down and attached to it. Your checklist is short: the packaging structure, with a diagram or photograph of the full-surround high-density EVA insert moulded to each piece; the test basis, with the 1.2-metre drop test report file showing what was actually tested; and the breakage procedure, with the steps for recording, photographing and reporting broken pieces. Send them with your order, and ask the factory to confirm each one in its reply.
This checklist is written for two bathroom sets on the Laki Living product pages: the Concrete Bathroom Set with Tray and the Concrete Bathroom Set with Storage Box. Look at both sets, decide which configuration fits your project or store, and send your enquiry through the inquiry form with your drawing or 3D file and this checklist. Put the packaging requirements in your order, and the factory works to the order — so when the goods arrive, you have something to check them against.

Read next

More from the journal

Keep readers moving through related announcements, stories, and field notes.