Quality & Testing
Concrete Vessels Keep Cracking? How to Check GRC Quality
Your concrete vessels arrived cracked. Here is how to check the formula, moulding, curing and packing, what documents to ask for, and how to inspect a delivery before you accept it.

Cracking in a concrete vessel is checked in four places: the formula, the moulding, the curing and the packing. Laki Living's position is that its vessels use a building-grade modified formula with GRC glass-fibre reinforcement for crack resistance and durability, but that claim should be backed by a formula description and test evidence from the factory before you treat it as settled. Until you have those documents, the claim is a brand position, not a verified third-party conclusion. This guide is for you if you buy concrete vessels for your brand or shop and want to check quality control before the next order ships. It is not for you if you only judge a vessel by its photograph. Picture the morning your shipment arrives: you open the first box and feel a hairline crack on the rim before you see it.
The Crack Is Not Bad Luck — One of Four Steps Was Missed
Take two boxes from the same delivery. In the first, every vessel is sound. In the second, three vessels have cracked rims and one tray has a chipped corner. A crack that appears in some pieces and not others usually means one of the four steps was not held steady: the formula was mixed one way on Monday and another way on Thursday, the mould was filled unevenly, the curing was cut short on a rushed batch, or the packing protected the pieces at the top of the pallet and left the ones at the bottom exposed. You cannot tell which step failed just by looking at the crack, and that is why guessing is expensive. The crack is a symptom; the four steps are where you look for the cause.
Diagnosing the Crack: The Common Causes and the Missing Evidence
The first place to look is the formula. A concrete vessel is only as strong as the mix inside it, and a mix that has not been properly modified, or that carries too little fibre reinforcement, will be brittle from the start. Laki Living states that its vessels use a building-grade modified formula with GRC glass-fibre reinforcement, intended to resist cracking and survive handling. That statement is the brand's position, and it is the starting point for your questions, not the end of them. What you need next is the formula description and the test evidence that supports it, because a formula claim without supporting documents is something you have to take on trust. Ask what evidence the factory can show you.
The second place to look is moulding and curing. A vessel that is thick on one side and thin on the other will dry unevenly, and the thin side is where the first crack opens. A vessel taken out of its mould too early, or cured for too short a time, may look finished on the surface while the inside is still weak. Neither problem shows up in a product photograph. Both show up when you hold the piece: the wall feels uneven, the rim is thinner on one side than the other, or the surface feels chalky where it should feel dense. Laki Living runs its own mould workshop in a 9,800-square-metre factory in Huizhou Zhongkai, Guangdong, founded in 2018. Check the piece in your hand all the same.
The third place to look is packing and transport. A concrete vessel is heavy for its size, and a thousand pieces travelling together will shift, press and knock against each other for days. Generic packing — loose fill, a thin box, no insert shaped to the piece — leaves the rim and the corners exposed, and the rim and the corners are exactly where cracks begin. The factory states that its finished packing is tested to a 1.2-metre drop standard and uses high-density EVA inserts moulded to each product. Ask what evidence supports that statement. None of these documents is presented here as a verified conclusion.
Deciding What to Do: Check in Three Steps — Formula, Testing, Inspection
First, ask the factory for the formula description and the test evidence, in writing, before you order. Ask for the formula description, for whatever crack-resistance test evidence exists, and for the drop-test report that supports the packing claim. Keep the reply with your order file, because a verbal assurance given on a call is worth nothing when a cracked batch arrives and you need to show what was promised. If the factory sends them, check that they relate to the vessel and the packing you are actually ordering. If the factory cannot send the documents, treat that as an open question, not as a yes or a no, and move to the second step.
Your second step is to check the sample, and the sample is where your hands do the checking. A physical sample can be ready in as fast as 3–5 days from your drawing or 3D file, and when it arrives, give it the inspection a photograph can never give you. Feel the rim and the base for uneven thickness, and look closely at the corners and the edges. Tap the body lightly and listen for a dull, even sound rather than a hollow one. Set the sealing lid on the vessel and check that it sits flat and closes evenly. Check the colour against your reference, and the laser-engraved logo for crispness and position. If any one of them is wrong, say so now, while a correction costs a second sample and not a thousand finished vessels.
Your third step is the receiving inspection, and it starts before you open the last box. When the shipment arrives, count the cartons first and note any carton that is crushed, wet or torn. Open a spread of cartons from different parts of the pallet, not just the ones on top, and check each vessel the same way you checked the sample: rim, base, corners, lid fit, colour, logo. Photograph every crack with its carton and packing, and write down the carton number. If you find cracks, set the damaged pieces aside in their original packing and contact the factory with the photographs and the carton numbers the same day. The point is to know on arrival whether the batch is sound, partly damaged, or faulty throughout.
Three Claims You Should Not Believe Yet
The first claim that should make you pause is that a vessel will absolutely never crack, offered with no test evidence behind it. Concrete is a strong material and a well-made vessel can be durable, but no honest supplier can promise zero cracks without evidence. If you hear it, ask for the formula description and the test evidence, and if the evidence does not arrive, treat the promise as a sales line.
The second claim to be careful with is the idea that one good sample proves the whole batch is sound. A sample proves that the factory can make one good piece. It does not prove that the factory made a thousand good pieces, because a batch can drift: the mix changes, the curing is rushed, the packing runs short at the end of the run. That is why the receiving inspection exists, and why you should check pieces from different cartons, not just the one the factory chose to show you.
The third situation is the one where the formula description and the test evidence simply are not available, and the temptation is to place the full order anyway. If the documents are missing, validate with a small order first and scale up only after the first batch has passed your receiving inspection. Laki Living's minimum is 1,000 pieces, so a small order here means starting with one design in one colour at that minimum, rather than ordering the whole range at once. Confirm the bulk lead time in writing before you commit.
Your Next Step: Prepare the Receiving Inspection List Before the Goods Arrive
Before your next shipment leaves the factory, prepare your receiving inspection list, and keep it with the order file. The list is the same three checks this guide has walked through: the formula description and test evidence the factory was asked to provide, the sample record you made when the physical piece arrived, and the receiving inspection itself — carton condition, rim, base, corners, lid fit, colour and logo, piece by piece, carton by carton. Photograph what you find and keep damaged pieces in their original packing until the factory has seen the evidence.
Check your vessels the way this guide describes, and a cracked piece gets found on the day it arrives, with the photograph and the carton number to back you up. Start with the Custom Cylindrical Concrete Candle Vessel with Sealing Lid, and compare the Marble-Look Concrete Candle Holder, the Travertine Concrete Fruit Bowl and the Terrazzo Jewelry Tray on their product pages. Send your enquiry through the inquiry form with your drawing or 3D file, your reference colour and this inspection list attached, and your first sample will be in your hands in as fast as 3–5 days — ready for you to hold, tap, and check, before a single piece of the bulk order is made.
